Jiangmen Yatai Intelligent Polishing Technology Co.,Ltd
Specializing in metal polishing machine for 16 years
(+86)-188 1380 3455
The polishing head is installed on the polishing wheel on the axis which does the high-speed rotation by the motor. The polishing machine focuses on the faucet polishing machine, automatic round polishing machine, and hardware polishing machine, we can reduce the labor cost.
The fastening of the model's polishing wheel is achieved by using a rotating nut to press the center iron on both sides of the polishing wheel to fasten it. Therefore, in the process of installation and disassembly, the safety protection device should be disassembled first and then the nut can be loosened or tightened. The polishing wheel is used for mounting and dismounting. After the installation is completed, the entire process of replacing the polishing wheel is completed by installing a safety protection device.
In the process of the polishing wheel, special attention should be paid to the fact that the polishing wheel is in a state of high-speed rotation when it is working, and therefore it is a dangerous state. Therefore, when the polishing wheel is working, the person must stay away from the polishing wheel. At the same time, it must be ensured that the polishing wheel has been fastened before use. At the same time, it should be noted that the tightening direction of the nut and the direction of rotation of the buffing wheel are reversed, otherwise, the buffing wheel will fly out during operation.
Any questions, please let me know. www.polishingequipments.com.